Prices shown in SEK kr — indicative only, final quote confirmed by sales.

Uses of EVA Backpack Cases

Two users, one product family, very different specifications. A nine-year-old carrying a week of school books into a primary school in Osaka, and a survey contractor crossing a site in Queensland with a folded drone on his back. Both wear what this workshop calls an EVA backpack for the same reason: a moulded structure that does not collapse or slump when it is empty. Almost nothing else about their cases should be alike.

Weight carried on two shoulders

For children's packs, the figure quoted in most school health guidance is a loaded weight somewhere around 10 percent of body weight, sometimes stated as high as 15 percent, which puts hard pressure on the pack's own tare weight before a single book goes in. That usually pushes the design toward a thinner moulded panel, a 3D mesh back panel for airflow, strap padding at 38 mm or wider on larger sizes, and a sternum strap once volume passes roughly 15 litres. Reflective piping along the front panel costs very little and is the sort of detail parents write reviews about.

Built around one payload

Adult packs get designed from the inside out. A drone pack is shaped around the folded airframe, the transmitter and three sets of propellers, so nothing rotates in transit and the batteries sit in their own sleeves rather than loose across the main compartment. Handheld console kits and cable loads get a divider plus a mesh pocket, working the same way camera inserts do, and those cavities are cut tighter than people expect, as the handheld console cases show.

  • School and daily commute: 12 to 18 litres, one large cavity, a padded sleeve, and a silhouette slim enough to hang from a classroom hook without sticking into the aisle.
  • Field and delivery work: 25 to 35 litres, water bottle side pockets, a high-visibility panel, and a base tough enough to be set down on gravel five times an hour.

Compliance changes with who carries it

Children's products entering the EU are checked against EN 71, including phthalate limits and migration of specified elements, while California buyers ask for CA Prop 65 declarations and most European importers want REACH SVHC screening on every trim, webbing and coating. Beyond chemistry there are mechanical checks: pull tests on strap attachments, seam strength at the shoulder join, colour fastness to rubbing around grade 4, and zipper cycling to about 5,000 openings, because practice shows the zipper goes before the fabric does.

Two sample parcels go out today from Gaobu. One holds children's packs in 420D with reflective piping for a Japanese distributor; the other holds a single drone pack with a rain cover stowed into the bottom panel, which the pattern maker says took longer to sort out than anything else on the job.

Frequently Asked Questions

What weight should a child's EVA backpack be?
School health guidance generally puts the loaded weight between 10 and 15 percent of the child's body weight, leaving very little room for the pack itself. In practice that means a thin moulded shell panel, padded straps around 38 mm wide, a 3D mesh back for airflow, and a sternum strap above roughly 15 litres.
Do EVA backpack cases comply with EN 71?
Children's packs shipped to the EU are tested against EN 71 for phthalate content and migration of specified elements across fabric, coating and trim. European importers also ask for REACH SVHC screening and Californian buyers for CA Prop 65 declarations. Reports come from independent labs, while ISO 9001 covers the factory system.
Can an EVA backpack be built around a specific drone or device?
Yes. Send the folded airframe, transmitter and batteries, or dimensional drawings, and we lay out pockets, battery sleeves and a transmitter board in die-cut foam or dividers. There is usually room left for a rain cover stowed in the base panel, which has become a standard request for outdoor users.